products categories
1 Inch Aluminum Alloy Air-Operated Double Diaphragm Pump
Wetted Body Material: Aluminum Alloy
Center Air Chamber Material: Aluminum Alloy
Diaphragm material: Teflon (TFM), Polyethylene(UPE), Santoprene (STP)
It is suitable for the transportation of benzene, solvent, paint, glue, resin, oil, pulp, mud, sludge, casting fluid, methanol, and neutral liquid, but not suitable for acid, alkali, seawater...
Diaphragm Specification:
| Material | Temperature Range |
| UPE (U) | -5 to +60°C |
| TFM (T) | -60 to +180°C |
| Stantoprene ® (O) | -10 to + 80°C |
Specification:
| Liquid inlet & outlet | 1” PT(BSP) |
| Air inlet | 3/8” PT(BSP) |
| Air outlet | 3/8” PT(BSP) |
| Lowest pressure | 0.5 Bar(kgf/cm²) ; 7.25psi |
| Max pressure | 8.3 Bar(kgf/cm²) ; 120psi |
| Working pressure advised | 1.5~5 Bar(kgf/cm²) ; 21.75psi~72.5psi |
| Quantity/cycle | 450ml |
| Solid limit | ⌀3mm |
| Air consumption | 1200Liter/Per Min.; 42.36 Scfm/Per Min |
| Inlet lift(deep) | 6 m-wet;3.7m-dry |
| Assemble size | 31(L)cm x 29(W)cm x 42(H)cm |
| Gross Weight | 11.5 KG |
| Max flow rate | 47.49 Gallon/Per Min. ; 180 Liter/Per Min. |
| Liquids Serviceability | Suitable for neutral liquids like neutralized wastewater, sludge, paint for coating, paint, ink, methanol, mud, and resin of low viscosity. It can also be used in transferring organic solvents, petroleum, and petrol with the plastic diaphragm. |
Related products
3/4 Inch Aluminum Alloy Air-Operated Double Diaphragm Pump
1 Inch Stainless Steel 316 Air-Operated Double Diaphragm Pump
1 Inch Polypropylene Air-Operated Double Diaphragm Pump
